Factory Free sample Foif Rtk - Trimble R10 GNSS Receiver Gps Gnss Rtk Blue tooth for Surveying RTK – Haodi

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

All we do is usually connected with our tenet " Consumer initial, Rely on 1st, devoting around the food stuff packaging and environmental safety for Theodolite Surveying Instrument, Surveying Accessories, Robotic Total Station Stonex, With our rules of " business reputation, partner trust and mutual benefit", welcome all of you to work together , grow together.
Factory Free sample Foif Rtk - Trimble R10 GNSS Receiver Gps Gnss Rtk Blue tooth for Surveying RTK – Haodi Detail:

Trimble R10 Trimble GNSS Receiver GNSS RTK Blue tooth for Surveying

Model R10
Measurement
Measuring points sooner, faster and in harsh
environments with Trimble HD-GNSS technology
Increased measurement productivity and traceability
with Trimble SurePoint electronic tilt compensation
Worldwide centimeter level positioning using Trimble
CenterPoint RTX satellite delivered corrections
Reduced downtime due to loss of radio signal with Trimble xFill technology
Advanced Trimble Maxwell 6 Custom Survey GNSS chips with 440 channels
Future-proof your investment with Trimble 360 GNSS tracking
CenterPoint RTX, OmniSTAR HP, XP, G2, VBS positioning
QZSS, WAAS, EGNOS, GAGAN
Positioning Rates: 1 Hz, 2 Hz, 5 Hz, 10 Hz, and 20 Hz
Code Differential GNSS Positioning
Horizontal 0.25 m + 1 ppm RMS
Vertical 0.50 m + 1 ppm RMS
SBAS differential typically <5 m 3DRMS
positioning accuracy
Static GNSS Surveying
High-Precision Static
Horizontal 3 mm + 0.1 ppm RMS
Vertical 3.5 mm + 0.4 ppm RMS
Static and Fast Static
Horizontal 3 mm + 0.5 ppm RMS
Vertical 5 mm + 0.5 ppm RMS
Real Time Kinematic Surveying
Single Baseline <30 km
Horizontal 8 mm + 1 ppm RMS
Vertical 15 mm + 1 ppm RMS
Network RTK
Horizontal 8 mm + 0.5 ppm RMS
Vertical 15 mm + 0.5 ppm RMS
RTK start-up time 2 to 8 seconds
for specified precisions
Trimble CenterPoint RTX
Horizontal 4 cm
Vertical 9 cm
RTX convergence time 30 minutes or less
for specified precisions
RTX QuickStart convergence 5 minutes or less
time for specified precisions
Trimble xFill
Horizontal RTK + 10 mm/minute RMS
Vertical RTK + 20 mm/minute RMS
Physical
Dimensions (W * H) 11.9 cm x 13.6 cm (4.6 in x 5.4 in)
Operating temperature -40℃ to +65℃ (-40ºF to +149ºF)
Storage temperature -40℃ to +75℃ (-40ºF to +167ºF)
Humidity 100%, considering
Ingress Protection IP67 dustproof, protected from temporary
immersion to depth of 1m (3.28ft.)
Shock and Vibration Tested and meets the following environmental standards
Vibration MIL-STD-810F, FIG.514.5C-1
Electrical
Power 11 to 24 V DC external power input with
over-voltage protection on Port 1 and Port 2 (7-pin Lemo)
Rechargeable, removable 7.4 V, 3.7 Ah Lithium-ion
smart battery with LED status indicators
Power consumption is 5.1 W in RTK rover mode with internal radio
Operating times on internal battery
450 MHz receive only option 5.5 hours
450 MHz receive/transmit option (0.5 W) 4.5 hours
450 MHz receive/transmit option (2.0 W) 3.7 hours
Cellular receive option 5.0 hours
Communications and Data Storage
Serial: 3-wire serial (7-pin Lemo)
USB v2.0: supports data download and high speed communications
Radio Modem: fully Integrated, sealed 450 MHz wide band receiver/transmitter
with frequency range of 410 MHz to 470 MHz:
– Transmit power: 2 W
– Range: 3–5 km typical / 10 km optimal
Cellular: integrated, 3.5 G modem, HSDPA 7.2 Mbps (download), GPRS multi-slot
class 12, EDGE multi-slot class 12, UMTS/HSDPA (WCDMA/FDD) 850/1900/2100MHz,
Quad-band EGSM 850/900/1800/1900 MHz, GSM CSD, 3GPP LTE
Bluetooth: fully integrated, fully sealed 2.4 GHz communications port
WiFi: 802.11 b,g, access point and client
mode, WPA/WPA2/WEP64/WEP128 encryption
External communication devices for corrections supported
on – Serial, USB, Ethernet, and Bluetooth ports
Data storage: 4 GB internal memory; over three years of raw
observables (approx. 1.4 MB /day), based on recording every
15 seconds from an average of 14 satellites
CMR+, CMRx, RTCM 2.1, RTCM 2.3, RTCM 3.0, RTCM 3.1 input and output
24 NMEA outputs, GSOF, RT17 and RT27 outputs
Webui
Offers simple configuration, operation, status, and data transfer
Accessible via WiFi, Serial, USB, and Bluetooth
Supported Trimble Controllers
Trimble TSC3, Trimble CU, Trimble Tablet Rugged PC
Certifications
FCC Part 15 (Class B device), 22, 24;
R&TTE CE Mark; C-Tick, A-Tick; PTCRB; WFA

Trimble R10 Trimble GNSS Receiver GNSS RTK Blue tooth for SurveyingTrimble R10 Trimble GNSS Receiver GNSS RTK Blue tooth for SurveyingTrimble R10 Trimble GNSS Receiver GNSS RTK Blue tooth for SurveyingTrimble R10 Trimble GNSS Receiver GNSS RTK Blue tooth for Surveying

 


Product detail pictures:

Factory Free sample Foif Rtk - Trimble R10 GNSS Receiver Gps Gnss Rtk Blue tooth for Surveying RTK – Haodi detail pictures

Factory Free sample Foif Rtk - Trimble R10 GNSS Receiver Gps Gnss Rtk Blue tooth for Surveying RTK – Haodi detail pictures

Factory Free sample Foif Rtk - Trimble R10 GNSS Receiver Gps Gnss Rtk Blue tooth for Surveying RTK – Haodi detail pictures

Factory Free sample Foif Rtk - Trimble R10 GNSS Receiver Gps Gnss Rtk Blue tooth for Surveying RTK – Haodi detail pictures

Factory Free sample Foif Rtk - Trimble R10 GNSS Receiver Gps Gnss Rtk Blue tooth for Surveying RTK – Haodi detail pictures

Factory Free sample Foif Rtk - Trimble R10 GNSS Receiver Gps Gnss Rtk Blue tooth for Surveying RTK – Haodi detail pictures


Related Product Guide:

We also offer product sourcing and flight consolidation services. We have our own factory and sourcing office. We can provide you with almost every type of product related to our product range for Factory Free sample Foif Rtk - Trimble R10 GNSS Receiver Gps Gnss Rtk Blue tooth for Surveying RTK – Haodi , The product will supply to all over the world, such as: Estonia, Philadelphia, Algeria, We are your reliable partner in international markets with the best quality products. Our advantages are innovation, flexibility and reliability which have been built during the last twenty years. We focus on providing service for our clients as a key element in strengthening our long-term relationships. Our continual availability of high grade products in combination with our excellent pre-sales and after-sales service ensures strong competitiveness in an increasingly globalized market.
  • It is really lucky to meet such a good supplier, this is our most satisfied cooperation, I think we will work again!
    5 Stars By Tina from Morocco - 2018.06.30 17:29
    Speaking of this cooperation with the Chinese manufacturer, I just want to say"well dodne", we are very satisfied.
    5 Stars By Steven from Mexico - 2018.09.16 11:31